HIKVISION DS-K1T604M User Manual

Face Recognition Terminal User Manual
29
Recommended Value: 12
Min. Detection Width
(Close to)
When the distance between the camera and the user is
short, the parameter represents the minimum percentage
of the facial width in the total width of the recognition area.
The actual percentage should be larger than the configured
value when face picture authentication. In this condition,
the device will not detect other parameters.
Margin (Left)
The distance from the face left side to the left margin in the
recognition area.
The actual distance should be larger than the configured
value when face picture authentication. Other percentages,
distances, and angles should also meet their conditions.
Margin (Top)
The distance from the face top side to the top margin in the
recognition area.
The actual distance should be larger than the configured
value when face picture authentication. Other percentages,
distances, and angles should also meet their conditions.
Margin (Right)
The distance from the face right side to the right margin in
the recognition area.
The actual distance should be larger than the configured
value when face picture authentication. Other percentages,
distances, and angles should also meet their conditions.
Margin (Bottom)
The distance from the face bottom side to the bottom
margin in the recognition area.
The actual distance should be larger than the configured
value when face picture authentication. Other percentages,
distances, and angles should also meet their conditions.
Pitch Angle
The maximum pitch angle when face authentication.
By default, the angle is 30°.
Yaw Angle
The maximum yaw angle when face authentication.
By default, the angle is 20°.
Pupillary Distance
The minimum resolution between two pupils when face
recognition. The actual resolution should be larger than the
configured value.
By default, the resolution is 40.
Score
Set the face picture’s score when recognition.
The device will score the captured picture according to the
yaw angle, pitch angle, and pupillary distance. If the score is
larger than the configured value, face recognition is failed.
Setting Fingerprint Parameters
Purpose:
You can set the fingerprint security level in this section.
Note: Only the device with the fingerprint scanning function supports the fingerprint related
function.

HIKVISION DS-K1T604M Specifications

General

Brand	HIKVISION
Model	DS-K1T604M
Category	Touch terminals
Language	English