To Next Page

To Previous Page

Face Recognition Terminal User Manual

Chapter 1 Overview

1.1 Introduction

DS-K1T604 series face recognition terminal is a kind of access control device for face

recognition, which is mainly applied in security access control systems, such as logistic

centers, airports, university campuses, alarm centrals, dwellings and so on.

1.2 Main Features

 7-inch LCD touch screen with the screen ratio of 16:9 and the resolutions of 1280 × 800 pixel

to display operation interface, detect live face, view live video, etc.

 Display advertising pictures or texts

 2,000,000 pixel wide-angle lens

 Adjusts supplement light brightness manually

 QR code authentication

 Face recognition distance: between 0.3 m and 1 m

 Suggested height for face recognition: between 1.4 m and 1.9 m

 Live face detection: Only live face can be detected and authenticated

 Deep learning algorithm

 Max. 10,000 face pictures storage

 Multiple authentication modes: face picture, card and face picture, card and fingerprint and

face picture, face picture and fingerprint, auto mode (switch between face picture, and card

and face picture automatically).

Note: Only products with fingerprint module support the fingerprint scanning function.

 Face recognition duration ≤ 0.5s/User; face recognition accuracy rate ≥ 99%

 Device parameters management, search, and settings

 Imports card and user data to the device via TCP/IP communication or USB disk

 Stand-alone operation

 Transmits data (authentication results and face pictures) to the client software via TCP/IP

communication

 Imports data (face pictures and blacklist) to the device via the USB disk or from the client

software

 Exports data (face pictures and events) from the device via the USB disk

 Blacklist management

Compare the user with the blacklist in the system and transmits the result to the client

software

HIKVISION DS-K1T604M User Manual

Other manuals for HIKVISION DS-K1T604M