HIKVISION DS-K3BC430LX Series - Page 16

Figure 2-1 Dimension
1.
Draw a central line on the installaon surface of the le or right pedestal.
2.
Draw other parallel lines for installing the other pedestals.
Note
The distance between the nearest two line is L + 180 mm. L represents the lane width.
3.
Slot on the installaon surface and dig installaon holes. Put 3 expansion bolts of M12*150 for
each pedestal.
Figure 2-2 Hole Posion and System Wiring
DS-K3BC430LX Series Swing Gate
4