Need help?Do you have a question about the HIKVISION DS-K3G411 Series and is the answer not in the manual?
General| Brand | HIKVISION |
|---|---|
| Model | DS-K3G411 Series |
| Category | Camera Accessories |
| Language | English |
Instructions for using and managing the product, subject to change.
Lists Hikvision's and other companies' trademarks and logos.
Legal disclaimer regarding product use, liability, warranties, and risks.
Compliance with FCC rules for digital devices and potential radio interference.
Product compliance with applicable harmonized European standards.
Critical safeguards to prevent serious injury or death during product use.
Precautions to prevent potential injury or equipment damage.
Describes the turnstile's purpose and common applications.
Lists key functionalities like processor, network communication, and modes.
Instructions on how to open the pedestals using a key.
Steps and notes before installing the pedestals on a suitable surface.
Describes the positioning of various components on the turnstile.
Instructions for connecting the AC electric supply to the switch.
Steps to connect the network cable to the network switch.
Details terminal descriptions for the main control board and BUS.
Explains how to set device mode and communication via DIP switches.
Wiring instructions for RS-485 interfaces and card readers.
Wiring instructions for RS-232 interfaces with QR scanners and text screens.
Wiring diagram and notes for Wiegand card readers.
How the barrier is controlled by the main board or third-party boards.
Wiring for alarm output signals.
Wiring diagram for the fire alarm module.
Steps to pair a remote control (keyfob) with the device.
Procedure to reset the device to default settings.
Configuration for alarm relay output modes (Normally Open/Normally Closed).
Steps to activate the device using the SADP tool.
Steps to activate the device using client software.
To Next Page