HIKVISION DS-K3G411 Series - Main Control Board DIP Switch Description

Interface Name Terminal Name Color Descripon
PB_485/232- Yellow RS-232_TX of
Fingerprint Recorder
Accessing (Default)
GND Black Grounding
4.4.2 Main Control Board DIP Switch Descripon
You can set the device mode, switch the communicaon mode between RS-232 and RS-485,
inialize the device via the DIP switch on the main control board.
Figure 4-5 DIP Switch on Main Control Board
You can set the device mode via the 8-bit DIP switch.
You can switch the communicaon mode between RS-232 and RS-485 via DIP A, DIP B, DIP C, DIP E,
DIP F, and DIP I.
DS-K3G411 Series Tripod Turnsle Quick Start Guide
20