HIKVISION DS-K3G411 Series - Initialize Device

To Next Page

To Previous Page

Note

• You can also pair the keyfob via the client

soware. For details, see Managing Keyfob in User

Manual of iVMS-4200 AC Client Soware.

• Only one turnsle can pair the keyfob. If mulple turnsles are in the pairing mode, the

keyfob will select only one of them to pair.

• For details about DIP switch value and meaning, see .

Oponal: Go to System → User → Keyfob User on the remote control page of the client

soware to delete the keyfob.

5.2 Inialize Device

Steps

1. Remove the jumper cap of inializaon pin on the main control board.

Figure 5-1 Inializaon Jumper Cap

DS-K3G411 Series Tripod Turnsle Quick Start Guide