HIKVISION DS-KB8113-IME1(B) Series - Network Settings

Note
We highly recommend you to create a strong password of your own choosing (using a minimum of
8 characters, including at least three kinds of following categories: upper case leers, lower case
leers, numbers, and special characters) in order to increase the security of your product. And we
recommend you change your password regularly, especially in the high security system, changing
the password monthly or weekly can beer protect your product.
Online Users
Click User Management → Online Users to enter the page.
Click Refresh to get the present
informaon.
Arming/Disarming
Informaon
Click User Management → Arming/Disarming Informaon to view the informaon. Click Refresh
to get the present informaon.
7.4.3 Network
Sengs
TCP/IP Sengs
TCP/IP sengs must be properly congured before you operate the device over network. The
device supports IPv4.
Steps
1.
Click Network → Basic Sengs → TCP/IP to enter the sengs page.
2.
Congure the network parameters.
-
Check DHCP, the device will get the parameters
automacally.
-
Set the IPv4 Address, IPv4 Subnet Mask and IPv4 Default Gateway manually.
3.
Select Network Card.
4.
Congure the DNS server.
5.
Click Save to enable the
sengs.
Port
Sengs
Steps
1.
Click Network → Basic Sengs → Port to enter the sengs page.
DS-KB8113-IME1(B) Series Vandal-Resistant Door Staon User Manual
27