Configuration -> Temperature Settings
If disable, terminal won’t detect temperature, it will work as a traditional access control terminal.
When measured temperature is larger than Max. value or smaller than Min. value, alarms will be triggered.
To determine whether the abnormal temperature can open the door or not.
If enabled, anyone with normal temperature can open the door. If disabled, only authorized persons with
normal temperature can.
Not required.
Not required.
For blackbody setting. Optional.
Note:
• Temperature Measurement Only mode is suitable for public venues such as supermarket, hospital,
museum, restaurants, etc. For office building, recommend to disable it.
For calibration purpose. Please refer to calibration guide. Calibration is recommended once per year.
To Next Page
Loading...
Need help?
General
