HIKVISION DS-KH6320-LE1

Set the alarm type as delay alarm, and you should set the entering delay
duraon and exing delay duraon.
•
Both the entering delay duraon and the exing delay duraon are from 30s
to 60s.
•
For Gas Detector and Smoke Detector, the alarm type is set as default 24h
alarm. The alarm type of them can not be changed.
Arming Mode Sengs
4 arming modes can be congured: stay mode, away mode, sleeping mode and
custom mode.
Before You Start
Tap
Sengs → → Preference to enable Alarm funcon.
Steps
Note
Arming status page and zone sengs page are hidden by default. You should enable
alarm funcon rst.
1.
Tap
Sengs → → Alarm Sengs to enter the arming mode sengs page.
2.
Tap Stay Mode, Away Mode, Sleeping Mode, or Custom to enter the page.
Figure 2-11 Arming Mode Sengs
3.
Arm the selected zone.
Network Indoor
Staon Conguraon Guide
10