HIKVISION DS-KH6320-LE1

Arm or disarm the zone for the indoor staon by entering the arm/disarm
password.
Note
Arm/Disarm sengs page is hidden by default. Tap Sengs → →
Preference to enable Alarm funcon, you can edit the alarm parameters.
Duress Code
When you are hijacked and forced to open the door, you can enter the
duress code. An alarm will be triggered to nofy the management center
secretly.
Note
The duress code and the unlock password cannot be the same.
3.
Enter the old password.
4.
Create a new password and conrm it.
5.
Tap OK to save the
sengs.
Note
Indoor Extension only supports admin password and arm/disarm password.
2.5 Synchronize Time
Steps
1.
Tap Sengs → , and enter the password.
2.
Tap to enter the me sengs page.
Network Indoor
Staon Conguraon Guide
12