HIKVISION DS-KH6320-LE1 - Receive Call from Station

Figure 2-13 Synchronize Time
3.
Enable NTP.
4.
Enter Sync Interval, IP Addr/Domain, and Port No.
Note
The default unit of synchronizing interval is minute.
5.
Select Time Zone.
2.6 Sound
Sengs
You can set the ringtone, ring duraon, volume of microphone and loudspeaker,
enable/disable touch sound, and auto-answer on call sengs page.
Steps
1.
Tap Sengs → to enter the call sengs page.
Network Indoor
Staon Conguraon Guide
13