HIKVISION DS-KH9310-WTE1 - Remote Operation via Client Software; Call Indoor Station via Client

Figure 3-5 System Maintenance
•
Click R
eboot and the system reboot dialog box pops up. Click Yes to
reboot the system.
•
Click Restore Default Sengs to restore the default parameters.
•
Click R
estore All to restore all parameters of device and reset the device
to inacve status.
Note
•
Click R
estore Default Sengs, all default sengs, excluding
ne
twork parameters, will be restored.
•
Click Restore All, all default sengs, including network
par
ameters, will be restored. The device will be reset to
inacvated status.
•
Click Import Conguraon File and the import le window pops up.
Select the pa
th of remote conguraon les. Click Open to import the
remote conguraon le. The conguraon le is imported and the
device will reboot automacally.
•
Click Export Conguraon File and the e
xport le window pops up.
Select the saving path of remote conguraon les and click Save to
export the conguraon le.
Video Intercom 9 Series Indoor Staon Conguraon Guide
22