HIKVISION DS-KH9310-WTE1 - Mobile Client Remote Features; Remote Operation Features

Figure 3-4 Synchronize Time
Select Time Z
one or Enable NTP. Click Save to save the me sengs.
•
Time Zone
•
Select a me zone from the drop-down list menu.
•
Click Synchronizaon.
•
NTP
•
Check the checkbo
x of Enable NTP to enable NTP.
•
Enter the server address, NTP port, and synchronizaon interval.
•
DS
T
•
Check the checkbox of Enable DST to enable DST.
•
Enter the start me and end me of DST, and set the DST bias.
Note
The default port No. is 123.
System Maintenance
Click S
ystem Maintenance to enter the page.
Video Intercom 9 Series Indoor Staon
Conguraon Guide
21