HIKVISION DS-KIS603-P Configuration Guide

Figure 2-1 Add the Device
4.
Oponal: Click Online Device, the acve online devices in the same local subnet
with the client soware will be displayed on the Online Device area.
Note
To add online devices to the soware, you are required to change the device IP
address to the same subnet with your computer rst.
1) You can click Refresh Every 60s to refresh the informaon of the online
devices.
2) Select the devices to be added from the list.
3) Click Add to Client to add the device to the client.
5.
Input the required
informaon.
Nickname
Network Indoor
Staon Conguraon Guide
18

HIKVISION DS-KIS603-P Specifications

General

Model	DS-KIS603-P
Category	Intercom System
Resolution	1024 x 600
Camera	2 MP HD Camera
Audio Input	Built-in Omnidirectional Microphone
Audio Output	Built-in Loudspeaker
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Supported Protocols	TCP/IP, SIP, RTSP
Display	7-inch TFT LCD
Network Protocol	TCP/IP
Power Supply	12 VDC
Installation	Surface Mount
IR Supplement	IR Supplement
Protection Level	IP65
Power Consumption	<10 W
Humidity	10% - 90% (non-condensing)
Communication Interface	Ethernet