HIKVISION DS-KIS603-P Configuration Guide

Device management includes device acvaon, adding device, eding device, and
deleng device, and so on.
Aer running the iVMS-4200, video intercom devices should be added to the client
soware for remote conguraon and management.
2.2.1 Add Video Intercom Devices
Steps
Note
•
You can add at most 512 indoor staons and main staons in total to the client,
and add at most 16 door staons to the client.
•
For video intercom devices, you are required to create the password to acvate
them before they can be added to the soware and work properly.
•
You can add online video intercom devices, and add them manually. Here take
adding online video intercom devices as example.
1.
Click Maintenance and Management → Device Management to enter the
device management page.
2.
Click the Device tap.
3.
Click Add to add the device to the client.
Network Indoor
Staon Conguraon Guide
17

HIKVISION DS-KIS603-P Specifications

General

Model	DS-KIS603-P
Category	Intercom System
Resolution	1024 x 600
Camera	2 MP HD Camera
Audio Input	Built-in Omnidirectional Microphone
Audio Output	Built-in Loudspeaker
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Supported Protocols	TCP/IP, SIP, RTSP
Display	7-inch TFT LCD
Network Protocol	TCP/IP
Power Supply	12 VDC
Installation	Surface Mount
IR Supplement	IR Supplement
Protection Level	IP65
Power Consumption	<10 W
Humidity	10% - 90% (non-condensing)
Communication Interface	Ethernet