HIKVISION DS-KIS603-P Configuration Guide

1 Local Operaon
1.1 Acvate Indoor Staon
You can only congure and operate the indoor staon aer creang a password for
the device acvaon.
Steps
1.
Power on the device. It will enter the acvaon page automacally.
Figure 1-1 Acvaon Page
2.
Create a password and conrm it.
3.
Tap OK to acvate the indoor staon.
Note
We highly recommend you to create a strong password of your own choosing
(using a minimum of 8 characters, including at least three kinds of following
categories: upper case leers, lower case leers, numbers, and special
characters) in order to increase the security of your product. And we
recommend you change your password regularly, especially in the high security
system, changing the password monthly or weekly can
beer protect your
product.
1.2 Conguraon Sengs
Network Indoor Staon Conguraon Guide
1

HIKVISION DS-KIS603-P Specifications

General

Model	DS-KIS603-P
Category	Intercom System
Resolution	1024 x 600
Camera	2 MP HD Camera
Audio Input	Built-in Omnidirectional Microphone
Audio Output	Built-in Loudspeaker
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Supported Protocols	TCP/IP, SIP, RTSP
Display	7-inch TFT LCD
Network Protocol	TCP/IP
Power Supply	12 VDC
Installation	Surface Mount
IR Supplement	IR Supplement
Protection Level	IP65
Power Consumption	<10 W
Humidity	10% - 90% (non-condensing)
Communication Interface	Ethernet