HIKVISION DS-KIS603-P Configuration Guide

RS-485
Click RS485 to enter the RS-485 sengs page. You can view and edit the
RS-485 parameters of the device.
Figure 2-7 RS-485 Sengs
Note
For indoor staon and main staon, there are 3 choices for the working
mode: transparent channel, disable, and custom.
2.4.2 Video Intercom
Click Video Intercom on the remote conguraon page to enter the video intercom
parameters
sengs: Device Number Conguraon, Time Parameters, Password,
Zone Conguraon, IP Camera Informaon, and Volume Input and Output
Conguraon, and so on.
Device ID
Conguraon
Steps
1.
Click ID Conguraon to enter device ID conguraon page.
Network Indoor
Staon Conguraon Guide
25

HIKVISION DS-KIS603-P Specifications

General

Model	DS-KIS603-P
Category	Intercom System
Resolution	1024 x 600
Camera	2 MP HD Camera
Audio Input	Built-in Omnidirectional Microphone
Audio Output	Built-in Loudspeaker
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Supported Protocols	TCP/IP, SIP, RTSP
Display	7-inch TFT LCD
Network Protocol	TCP/IP
Power Supply	12 VDC
Installation	Surface Mount
IR Supplement	IR Supplement
Protection Level	IP65
Power Consumption	<10 W
Humidity	10% - 90% (non-condensing)
Communication Interface	Ethernet