HIKVISION DS-KIS603-P Configuration Guide

Figure 2-8 ID Conguraon
2.
Select the device type from the drop-down list, and set the corresponding
informaon.
3.
Click Save to enable the device number conguraon.
Time Parameters
Steps
1.
Click Time Parameters to enter me parameters sengs page.
Figure 2-9 Time Parameters
2.
Congure the maximum ring duraon, maximum live view me, and call
forwarding
me.
3.
Click Save.
Note
•
Maximum ring duraon is the maximum duraon of indoor staon when it is
called without being received. The range of maximum ring duraon varies
from 30s to 60s.
•
Maximum live view me is the maximum me of playing live view of the
indoor
staon. The range of maximum live view me varies from 10s to 60s.
Network Indoor Staon Conguraon Guide
26

HIKVISION DS-KIS603-P Specifications

General

Model	DS-KIS603-P
Category	Intercom System
Resolution	1024 x 600
Camera	2 MP HD Camera
Audio Input	Built-in Omnidirectional Microphone
Audio Output	Built-in Loudspeaker
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Supported Protocols	TCP/IP, SIP, RTSP
Display	7-inch TFT LCD
Network Protocol	TCP/IP
Power Supply	12 VDC
Installation	Surface Mount
IR Supplement	IR Supplement
Protection Level	IP65
Power Consumption	<10 W
Humidity	10% - 90% (non-condensing)
Communication Interface	Ethernet