HIKVISION DS-KIS603-P Configuration Guide

Figure 2-5 System Maintenance
•
Click Reboot and the system reboot dialog box pops up. Click Yes to
reboot the system.
•
Click Restore Default Sengs to restore the default parameters.
•
Click Restore All to restore all parameters of device and reset the device
to inacve status.
Note
•
Click Restore Default Sengs, all default sengs, excluding
network parameters, will be restored.
•
Click Restore All, all default sengs, including network
parameters, will be restored. The device will be reset to
inacvated status.
•
Click Import Conguraon File and the import le window pops up.
Select the path of remote conguraon les. Click Open to import the
remote conguraon le. The conguraon le is imported and the
device will reboot automacally.
•
Click Export Conguraon File and the export le window pops up.
Select the saving path of remote conguraon les and click Save to
export the conguraon le.
Network Indoor
Staon Conguraon Guide
23

HIKVISION DS-KIS603-P Specifications

General

Brand	HIKVISION
Model	DS-KIS603-P
Category	Intercom System
Language	English