HIKVISION DS-KIS603-P Configuration Guide

Note
•
The default port No. is 8000.
•
Aer eding the local network parameters of device, you should add the
devices to the device list again.
Linked Devices Network Conguraon
In the linked devices network conguraon page, you can congure the network
parameters of main
staons, SIP servers and management centers of the same LAN.
The devices can be linked to the door staon and realize the linkage between these
devices.
Steps
1.
Click Linked Network Conguraon to enter linked network conguraon page.
2.
Enter the main staon IP address, (main) door staon IP address, SIP server IP
address, management center IP address, and doorphone IP address.
3.
Select the main door
staon type from the drop-down list.
4.
Click Save to enable the sengs.
Note
•
Aer adding main staon IP Address, the linkage between indoor staon and
main staon can be realized.
•
Aer adding the door staon IP Address, the video intercom between indoor
staons of same building can be realized.
•
Aer adding SIP Server Address IP, the video intercom of same community:
video intercom between indoor staons of dierent building, calling indoor
staon from outer door staon and video intercom between management
center and indoors.
•
Aer adding management center IP Address, the events can be uploaded to
the management center.
•
For indoor extension, only parameter about the main indoor staon should
be congured.
DNS Sengs
The indoor staon supports 2 DNS address.
Network Indoor
Staon Conguraon Guide
33

HIKVISION DS-KIS603-P Specifications

General

Brand	HIKVISION
Model	DS-KIS603-P
Category	Intercom System
Language	English