HIKVISION DS-MCW407 - Chapter 6 Network Settings; Set Positioning

Chapter 6 Network Sengs
6.1 Set Posioning
You can set posioning to locate the posion of the device.
Steps
1.
Enable posioning via the below operaons.
-
Swipe the screen down to open the nocaon center. Select to enable posioning. You
can hold the icon to enter the
sengs page.
Figure 6-1 Enable Posioning from Nocaon Center
-
On the main menu, select Set → Network → Locaon → Locaon to select the posioning
mode.
Body Camera User Manual
16