HIKVISION DS-MCW407 - Chapter 9 Maintenance; View Device Information; View Battery Information; View System Information

Chapter 9 Maintenance
9.1 View Device Informaon
Select Set → System → Device Informaon to view the device informaon such as person ID,
device ID, etc. Select User Informaon to select the informaon to display on the lower le corner
of the live view page.
9.2 View Baery Informaon
Select Set → System → Power Supply → Baery Informaon to view the baery power, status,
and temperature.
9.3 View System
Informaon
Select Set → System → System → System Informaon to view the system informaon such as
model, serial No., soware version, etc.
9.4 View License
Informaon
Select Set → System → System → License Informaon to view the license informaon.
9.5 Enable Password
You can enable password vericaon for playback, entering main menu, and shutdown.
Steps
Note
It is recommended to enable password for data security.
1.
Select Set → System → PWD Vericaon .
2.
Enable or disable Playback Vericaon, Menu Vericaon, and Shutdown Vericaon
according to your needs.
3.
Enter the admin password.
Note
If the password set when acvaon is not changed, the admin password is the acvaon
password. If the admin password has been changed aer acvaon, the admin password is the
changed one.
Body Camera User Manual
29