HIKVISION DS-PDMCX-E-WB - Page 3

DS-PDMCX-E-WE Signal Strength
DS-PDMCX-E-WB Signal Strength
DS-PDMCX-E-WB Wiring
DS-PDMCX-E-WE Wiring
1. Check Signal Strength
Enter the signal checking mode by operang on the control panel. Trigger the detector.
Solid Green for 3 s - Strong Signal
Solid Orange for 3 s - Medium Signal
Solid Red for 3 s - Weak Signal
Red light flashes for 3S - Lost Signal
2. Route the cable
a. Knock out the cable hole sheet.
b. Route the external input cable through the cable hole.
5
Installaon
3
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
Signal Strength Test
Signal Strength Test