Panic Alarm Station User Manual
19
2. Click the Device Management icon to enter the Device Management interface, as shown in the figure below.
3. Click Add Device Type to enter the adding device type page.
4. Select Security Control Panel.
5. Click Security Control Panel in the Organization list.
6. Check the device status from the device list, and select an inactive device.
7. Click the Activate button to pop up the Activation interface.
8. Create a password and input the password in the password field, and confirm the password.
STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password of your own choosing
(using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in
order to increase the security of your product. And we recommend you reset your password regularly, especially in the
high security system, resetting the password monthly or weekly can better protect your product.
9. Click OK button to start activation.
10. Click the Modify Netinfo button to pop up the Network Parameter Modification interface, as shown in the figure below.
To Next Page
Loading...
Need help?
General
