HIKVISION DS-PEA1-21 - Alarm Pop-Up Window Settings

Panic Alarm Station User Manual
43
4. Click Save to save the settings.
The Alarm In is emergent by default.
Alarm Pop-up Window Settings 4.3.3
Purpose
When the devices are armed, the alarm intercom will pop up once the detectors are triggered.
Enable Pop-up Window Function
When the devices are arming, enable the pop-up window by following the steps bellow.
Steps:
1. Click Tool > Device Arming Control to enter the device arming control interface.
2. Click the alarm device to make it in the state of arming.
Pop-up Window Operation
When the window pops up, you can
click to answer the alarm calling or service consulting;
click to reject the alarm calling or service consulting;
click to hold on the calling or consulting;
click to turn on electric lock of alarm bar;
click to turn on alarm lamp (applicable to panic alarm station with camera);