Panic Alarm Stationļ User Manual
38
2. Check the corresponding checkbox to select the display of camera name, date or week if required.
3. Edit the camera name in the text field of Camera Name.
4. Select from the drop-down list to set the time format, date format and display mode.
5. Check the checkbox in front of textbox to enable the on-screen display.
6. Input the characters in the textbox.
7. Use the mouse to click and drag the red text frame in the live view window to adjust the text overlay position.
8. Click Save to save the settings.
Image Settings
Steps:
1. Click Remote Configuration > Image > Image Settings to enter the image settings interface.
2. Drag the to adjust the brightness, contrast, saturation of the image.
To Next Page
Loading...
Need help?
General
