EasyManuals Logo

HIKVISION DS-PHA48-EP User Manual

HIKVISION DS-PHA48-EP
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
27
3. Set the keypad name.
4. Check linked areas.
5. Select the keypad mode.
Standard Mode
Area selection and fault confirmation are supported when swiping tag to arm or disarm.
Simple Mode
No Area selection and fault confirmation when swiping tag to arm or disarm.
6. Enable the function according to your actual needs.
Authorization
Only standard mode has this function. You can select the authorization method.
Active on Entry Delay
When someone enters the delay zone, the screen and backlight of the keypad will be on.
This function can indicate the keypad position for those who enter the delay zone at night.
Keypad Arming Light
Enable the arming indicator of the keypad.
Note
Only enabled areas will be listed.
The newly added peripheral is linked to area 1 by default.
For detailed information, refers to the keypad user manual.
7. Click OK.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-PHA48-EP and is the answer not in the manual?

HIKVISION DS-PHA48-EP Specifications

General IconGeneral
2G standardsGSM
Number of alarm zones48
Alert notification typeSMS
Connectivity technologyWired & Wireless
Mobile network generation4G
Smartphone remote supportYes
Number of simultaneous users48 user(s)
Control type-
Mounting typeWall
Product colorWhite
Housing materialPlastic
Number of door/window sensors- pc(s)
Battery life36 h
Input voltage100 - 240 V
Battery voltage13.5 V
Battery capacity7000 mAh
Weight and Dimensions IconWeight and Dimensions
Alarm control panel weight996.5 g
Alarm control panel dimensions (W x D x H)261 x 86.4 x 261 mm

Related product manuals