58
Schedule
for details.
Arm/Disarm the Area
Arm or disarm the area manually as you desired.
On the device list page, tap the AX HYBRID PRO and then log in to the device (if required) to enter
the Area page.
Operations for a Single Area
● Away Arming: Tap to away arm a single area. When all the people in the detection area
leave, turn on the Away mode to arm all zones in the area after the defined dwell time.
● Stay Arming: Tap to stay arm a single area. When all the people stays inside the detection
area, turn on the Stay mode to arm all the perimeter burglary detection set in all the zones of all
areas.
Operations for Multiple Areas
● Select Areas: Tap to select areas you want to operate. If you do not select areas, following
operations will take effect for all areas.
● Away Arming: Tap to away arm selected areas. When all the people in the detection area
leave, turn on the Away mode to arm all zones in all areas after the defined dwell time.
● Stay Arming: Tap to stay arm all areas. When the people stays inside the detection area,
turn on the Stay mode to arm all the perimeter burglary detection (such as perimeter detector,
magnetic contacts, curtain detector in the balcony) set in all the zones of all areas. At the
meantime, the detectors inside the detection area are bypassed (such as PIR detectors). People
can move inside the area and alarm will not be triggered.
● Disarming: Tap to disarm all areas. In Disarm mode, all the zones of all areas will not
trigger alarm, no matter alarm events happen or not.
● Silent Alarm: Tap to silent alarms for all areas.
3.2.5 Zone Management
1. Tap Device to view linked zones.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
