HIKVISION DS-PHA64-LP User Manual

9
If you make sure that the home Wi-Fi password is correct and quality is good, tap Refresh
Network, the control panel will enter a new countdown. You can wait for the connection.
If you want to change the home Wi-Fi, you should change the home Wi-Fi connected to the mobile
phone first, then press the RESET button of the control panel (marked in the figure below) for 10
seconds. Tap Retry. The interface will jump back step 8, you can configure the network again.

HIKVISION DS-PHA64-LP Specifications

General

Wi-Fi	Yes
Wi-Fi frequency	2.4 GHz
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Number of alarm zones	64
Connectivity technology	Wired & Wireless
Operating temperature (T-T)	-10 - 40 °C
Number of simultaneous users	62 user(s)
Operating relative humidity (H-H)	10 - 90 %
Number of simultaneously connected devices (max)	-
Batteries included	No
Number of door/window sensors	- pc(s)
Mounting type	Wall
Product color	White
Housing material	Plastic
Battery life	36 h
Alarm current	2000 mA
Input voltage	100 - 240 V
Battery voltage	12 V
Battery capacity	7000 mAh

Weight and Dimensions

Alarm control panel weight	997 g
Alarm control panel dimensions (W x D x H)	261 x 86.4 x 199 mm