104
Device Enroll Mode
Click Enter the Enrollment Mode to make the panel enter the enroll mode.
Security Settings
SSH Settings
Enable or disable SSH (Secure Shell) according to your actual needs.
Click System → System Security → SSH Settings to enter the SSH Settings page and you can
enable or disable the SSH function.
Locking User Settings
The device will be locked 90 s after 3 failed credential attempts (can be set in Retry Time before
Auto-Lock) in a minute.
You can view the locked user or unlock a user and set the user locked duration.
Note
To compliant the EN requirement, the system will only record the same log 3 times continuously.
Steps
1. Click System → System Security → User Lockout Attempts to enter the Locking User Settings
page.
To Next Page
Loading...
Need help?
General
