Figure 5-30 Draw the Privacy Mask
2. Click the PTZ control buttons to find the area you want to set the privacy mask.
3. Click ; click and drag the mouse in the live video window to draw the area.
4. You can drag the corners of the red rectangle area to draw a polygon mask.
5. Click to finish drawing or click to clear all of the areas you set without
saving them.
6. Click to save the privacy mask, and it will be listed in the Privacy Mask List area; set
the value of Active Zoom Ratio on your demand, and then the mask will only appear when
the zoom ratio is greater than the predefined value.
Figure 5-31 Privacy Mask List
7. Check the checkbox of Enable Privacy Mask to enable this function.
You are allowed to draw up to 8 areas for the mini PTZ camera.
To Next Page
Loading...
Need help?
General
