and trigger alarm output are selectable. Please refer to Step 3 in Section 5.2.1 Configuring
Motion Detection.
9. Click to save the settings.
5.3.4 Configuring Dual-VCA
Purpose:
Enable the VCA function and then the information of the objects (e.g. human, vehicle, etc.) will
be marked in the video stream and you can set rules on the connected back-end device to detect
the events including line crossing, intrusion, etc..
Steps:
1. Enter the Dual-VCA function configuration interface.
Configuration> Video/Audio> Display Info. on Stream
2. Check the Enable Dual-VCA checkbox.
3. Click to save the settings.
To Next Page
Loading...
