Schedule:
In Schedule mode, you can set the time schedule for day mode as shown in Figure 6-30.
The rest time out of the schedule is for night mode.
This function varies depending on the models of mini PTZ camera.
Figure 6-30 Day Night Schedule
Smart Supplement Light
If the light supplement is on and the image center is overexposure, you can enable this
function.
Auto: The brightness of the infrared light will be adjusted automatically. IR Light
Sensitivity value ranges from 0 to 100. Trigger Mode can be set to Camera or
Photosensitive.
Manual: you need to adjust the brightness value of infrared light manually. IR Light
Bright value ranges from 0 to 100.
Only the IR mini PTZ cameras support IR Light Mode.
When the IR Light Mode is auto, the day/night mode is adjusted automatically according to
the IR Light Mode. Manually setting the day/night mode is invalid.
When the IR Light Mode is manual and the IR Light Bright is 0, you can set the day/night
mode manually.
When the IR Light Mode is manual and the IR Light Bright is not 0, the night mode is set as
the default mode. Manually setting the day/night mode is invalid.
Backlight Settings
BLC (Back Light Compensation)
If there’s a bright backlight, the subject in front of the backlight appears silhouetted or dark.
Enabling BLC(back light compensation) function can correct the exposure of the subject. But the
backlight environment is washed out to white.
WDR (Wide Dynamic Range)
The wide dynamic range (WDR) function helps the camera provide clear images even under back
light circumstances. When there are both very bright and very dark areas simultaneously in the
field of view, WDR balances the brightness level of the whole image and provide clear images
with details.
You can enable or disable the WDR function as shown in Figure 6-31. The wide dynamic level
ranges from 0 to 100.
To Next Page
Loading...
Need help?
General
