Need help?Do you have a question about the HIKVISION ECI-T24F Series and is the answer not in the manual?
General| Image Sensor | 1/2.7" Progressive Scan CMOS |
|---|---|
| IR Range | Up to 30 m |
| Protection Level | IP67 |
| Lens | 2.8 mm |
| Video Compression | H.265+/H.265/H.264+/H.264 |
| Operating Conditions | -30 °C to 60 °C (-22 °F to 140 °F), humidity: ≤ 95% (non-condensing) |
| Power Supply | DC 12 V ± 25%, PoE (802.3af) |
| Power Consumption | DC 12 V: 5 W max., PoE: 6.5 W max. |
| Material | Metal |
| Focal Length | 2.8 mm |
| Viewing Angle | Horizontal: 104°, Vertical: 56°, Diagonal: 120° |
Details FCC compliance, rules, and operational conditions for the device.
Confirms compliance with European directives and standards for electrical devices.
Highlights critical safeguards to prevent serious injury or death.
Outlines precautions to prevent potential injury or material damage.
Guides on using the drill template, preparing the mounting surface, and disassembling the camera.
Steps for routing cables, installing the camera body, and connecting power/network.
Instructions on how to adjust the camera's pan, tilt, and rotation angles.
Illustrates methods for connecting the camera to the network.
Explains methods for activating the camera via web browser or SADP software.
Guides on changing the camera's IP address using SADP software.
Details on enabling Hik-Connect via SADP software or a web browser.
Steps for adding the camera to the Hik-Connect app or NVR.
Instructions for initializing the microSD card for recording.
To Next Page