HIKVISION HF-VS409 User Manual

Detecon
Target
You can specify the object type, and the device only detects the selected
type of objects.
8.
Click Save.
9.
Repeat above steps to set other lines.
10.
Set arming schedule. See Set Arming Schedule .
11.
Set linkage method. See
Linkage Method Sengs .
Set Indoor Channel Blockage Detecon
The funcon is developed to detect whether the indoor passages are blocked by old junk. If the
duraon reaches the seng, the re alarm will be triggered and a series of operaons will be
executed.
Before You Start
Note
Fire Source Detecon and On/O Work Detecon will be out of service when Indoor Channel
Blockage Detecon is enabled.
Steps
1.
Click Conguraon → Event → Smart Event → Indoor Channel Blockage Detecon .
2.
Click Enable.
3.
Set
detecon area and disabled area.
1) Click Draw
Detecon Area/Draw Disabled Area.
2) Le-click to draw a convex quadrilateral.
3) Repeat step a and step b to draw less than 4
detecon areas/disabled areas.
4) Oponal: You can edit the areas you draw as follows.
●
Hover mouse inside an area and drag to change its
locaon.
●
Hover mouse on the vertexes of an area and drag to adjust the their locaons.
●
Click Clear All to delete all areas exist.
Device will process smart
detecon and analysis on events in detecon areas and neglect
feedbacks from disabled areas.
4.
Set
detecon parameters.
Time Threshold(s)
If the indoor channels are blocked by old junk and the duraon reaches the seng, the re
alarm will be triggered.
5.
Set arming schedule. See Set Arming Schedule .
6.
Set linkage method. See
Linkage Method Sengs .
7.
Click Save.
HF-VS409 Smoke Detected Camera User Manual
56

HIKVISION HF-VS409 Specifications

General

Brand	HIKVISION
Model	HF-VS409
Category	Digital Camera
Language	English