HIKVISION iDS-TCM403-AI User Manual

Network Traffic Camera User Manual
16
Figure 4-2 Live Status and Traffic Statistics
As displayed on the figure above, the picture area can be divided into three parts:
scene shot area, digital zoom area, license plate area.
 Arm the camera: Level 1 Arming, Level 2 Arming, and Disarming are
selectable.
 Level 1 Arming: The camera is allowed to connect to only one data storage
device for image and information uploading. It is recommended when you
develop products, that is, if you use SDK, level 1 arming is the only option.
 Level 2 Arming: The camera is allowed to connect to three data storage
devices for image and information uploading.
Note: Level 2 Arming is recommended for debugging. Because when the
device is running, Level 1 Arming cannot be activated.
 Measure Plate: Measure the pixel of the captured license plate. You can click
Disable to disable the function.
 Ruler On: Enable ruler to measure the length of the captured license plate. You
can click Ruler Off to disable the function.
 Open Folder: Open the folder that saves the captured pictures.
 Capture: Click Capture to capture the picture, and the captured pictures will be
listed in the Picture List.

HIKVISION iDS-TCM403-AI Specifications

General

Brand	HIKVISION
Model	iDS-TCM403-AI
Category	Security Camera
Language	English