Video Intercom Door Station·User Manual
91
Figure 9-28 Adding Cards in Batch
2. Select card adding mode and card type.
Two types of card are available. Resident Card is used by residents living in the
community, and Other Card is used by visitors (guest, serviceman, etc.) in the
community.
If you add card in batch, please set the start card No. and the end card No..
If you add card singly, please enter the card No..
If you add card via card reader, please swipe the card in the card reader, and the
corresponding card No. will be shown automatically in the Card No. textbox.
3. Click OK to accomplish carding adding operation.
Click Delete All to delete all cards added in iVMS-4200.
Select one or multiple cards, and click Delete Card to delete selected cards added in
iVMS-4200.
Card Encrypt is only available to cards added via card reader. Enabling Card Encrypt
can improve the card security to prevent it from being copied. But the same time, the
default key of all the available sectors of the card is modified.
Issuing Card
Click Issue Card to pop up card issuing window.
To Next Page
Loading...
Need help?
General
