HIKVISION KD3 Series User Manual

Video Intercom Door Station·User Manual
61
Figure 8-33 Video Display
2. Select the camera No..
3. Select the video standard (PAL and NTSC can be selected).
4. Set the brightness, contrast, and saturation of the video.
5. Click the Save button to enable the settings.
Click the Restore Default Settings button to restore all parameters excluding network
parameters to the factory settings.
8.5 Video Intercom Device Set-up Tool
Purpose:
You can assign the device to the community, activate and set the device, and configure
the network parameters and linked network parameters for the device by using the
video intercom device set-up tool.
In the device list area, click to enter the video intercom device set-up tool.
Figure 8-34 Video Device Set-up Tool

HIKVISION KD3 Series Specifications

General

Brand	HIKVISION
Model	KD3 Series
Category	Intercom System
Language	English