HIKVISION PanoVu Series User Manual

Note
The Intrinsic Parameters is reserved for professional personnel. You are not recommended to
adjust the parameters.
Set Global Size Filter
Targets larger or smaller than the set size range are ltered out. The sengs is valid for all
perimeter detecon rules.
Steps
1. Go to
Conguraon → Event → Smart Event → Advanced Parameters Conguraon .
2. Check Global Size Filter to enable the lter.
3. Click to draw a maximum size frame on live image.
4. Click to draw a minimum size frame on live image.
5. Click Save.
Set Shield Region
The shield region allows you to set the specic region in which the detecon rule is invalid.
Steps
1. Go to Conguraon → Event → Smart Event → Advanced Parameters Conguraon .
2. Click
to draw shield area. Repeat this step above to set more shield regions.
3. Oponal: Click to delete the drawn areas.
4. Click Save.
Stched PanoVu Camera with PTZ User Manual
77

HIKVISION PanoVu Series Specifications

General

Brand	HIKVISION
Model	PanoVu Series
Category	Security Camera
Language	English