Hill-Rom LI900B2 - Mobilizing the Patient

PROPRIETARY AND CONFIDENTIAL DRAFT: 18 May 2018
171051(9) - Hill-Rom® 900 Electric Bed User Manual Page 35
Mobilizing the patient
Mobilizing the patient
Electrical Functions
The bed’s power-driven movements are controlled using a control pendant*, a
control unit on a flexible arm*, controls built into the half-siderails* or bilateral
HiLow pedals with caregiver mode* by pressing and holding the button for the
corresponding function. The movement stops when the button is released or
when the limit of movement is reached.
Caregivers need to assess whether patients can be left unattended with access to the
functions on the control pendant or the flexible arm.
Control pendants*
The control pendant can be stowed under
the siderail.
If the LI900B0 bed was not originally fitted
with a control pendant, they can be
ordered as an accessory with the P/N
AD281B
1
. It can be placed on the right-
hand or left-hand side of the bed.
Caregiver half-siderail* controls
They are placed inside the head half-siderails on either side of the bed. They are
to be used by caregivers
1. Remember to specify the model of the unit.
LI900B0
*
LI900B3
LI900B0
LI900B2
LI900B3