PROPRIETARY AND CONFIDENTIAL DRAFT: May 18, 2018
Page 84 171051(9) - Hill-Rom® 900 Electric Bed User Manual
Visit the website for more information
www.nf-environnement-ameublement.com
• The NF Environnement certified Hill-Rom® 900 bed is designed,
manufactured and checked to reduce environmental impact up to end of life
(limitation of transformation energy of the materials, heavy metal-free
finishing products, possibility to recycle, etc.).
• INMETRO rule Nr. 350, September 06, 2010 and
mandatory certification of electrical equipment under
requirements of National Health Surveillance Agency -
ANVISA - RDC Nr. 27, 2011-06-21 and IN 03, 2011-06-
21.
Electromagnetic conformance
Complies with electromagnetic emission standards
This device meets all the requirements related to electromagnetic compatibility, in
accordance with the standard IEC 60601-1-2 and the directives applicable to medical
devices, and has passed all the tests to demonstrate that it meets these requirements. It
is most improbable that users experience problems due to deficient electromagnetic
immunity. However, electromagnetic immunity is always relative, and standards are
based on anticipated environments of usage. If the user notices that the device
behaves unusually, and especially if this behavior is intermittent and occurs when in
the vicinity of radio or TV transmitters, cell phones or electrosurgical equipment, this
may be a sign of electromagnetic interference. If such behavior occurs, users must try
to move the equipment well clear of the origin of the interference with the device.
The Hill-Rom® 900 bed must not be used close to or on top of other items of
equipment. If this is necessary, the Hill-Rom® 900 bed must be tested to confirm that
it functions properly in the required configuration. Make sure that the Hill-Rom®
900 bed functions correctly when used in the vicinity of other electric appliances.
Mobile and portable radio frequency (RF) communication equipment may damage
the electric medical equipment.
Electric medical equipment demands special precautions regarding electromagnetic
compatibility (EMC) and must be installed and used in accordance with the EMC-
related information contained in this manual.
The use of accessories, transducers and cables other than those specified, apart from
the transducers and cables sold by the manufacturer of these devices, such as
replacements of internal components, may result in an increase and/or reduction of
the immunity of the Hill-Rom® 900 bed.
To Next Page
Loading...
