171051(9) - Hill-Rom® 900 Electric Bed User Manual Page 85
PROPRIETARY AND CONFIDENTIAL DRAFT: May 18, 2018
Manufacturer's guide and declaration – electromagnetic emissions
The Hill-Rom® 900 is designed for use in the electromagnetic environment specified below.
Users must ensure that the bed is used in this environment.
Emission test Compliance Electromagnetic environment - Guide
RF emissions
CISPR 11
Group 1 The Hill-Rom® 900 only uses radio electric power for
its internal functions. Consequently, it only produces
very weak RF emissions that are unlikely to cause
interference with nearby electronic equipment.
CISPR 11 RF
emissions
Class A The Hill-Rom® 900 can be used in all places other
than domestic premises and premises that are directly
connected to the low voltage public mains power
network used to supply domestic buildings.
Harmonic emissions
IEC 61000-3-2
Class A
Flicker
IEC 61000-3-3
Applicable
CISPR 14-1 RF
emissions
Compliant The Hill-Rom® 900 is not designed to be connected to
other equipment.
To Next Page
Loading...
