What to do if the weight shown on the Hill-Rom Medical Equipment scale display is flashing?
To resolve the issue of a Hill-Rom medical equipment scale display showing a flashing weight, calibrate the scale. If the problem persists, replace the scale P.C. board.
Why the Steering Plus™ Steering System Does Not Operate Correctly in Hill-Rom P8020 Medical Equipment?
If the Steering Plus™ Steering System on your Hill-Rom medical equipment does not operate correctly, examine the fifth wheel pivot arms and pivot bracket for correct assembly. If problems persist, remove the Steering Plus™ Steering System assembly and replace any damaged or inoperative parts, or replace the fifth wheel.
What to do if the siderail on Hill-Rom P8020 Medical Equipment does not operate correctly?
If the siderail on your Hill-Rom medical equipment does not operate correctly, check for any obstructions and remove them. If the problem continues, consider replacing the latch.
What causes loss of corner steer in Hill-Rom Medical Equipment?
To resolve the issue of loss of corner steer in your Hill-Rom medical equipment, try tightening the brake/steer link screw. If this doesn't solve the problem, consider replacing the caster.
Why are there reduced pedal pumps on my Hill-Rom P8020 Medical Equipment?
To address the issue of reduced pedal pumps on your Hill-Rom medical equipment, start by removing air from the hydraulic system. If the head or foot end still doesn't rise, replace the corresponding hydraulic cylinder.
How to fix a push handle malfunction on Hill-Rom Medical Equipment?
To fix a push handle malfunction on Hill-Rom medical equipment, first remove any interference that may be obstructing it. If the issue persists, consider replacing the push handle latch or the push handles themselves.
What to do if the Hill-Rom P8020 Medical Equipment stretcher will not go into neutral position?
If your Hill-Rom medical equipment stretcher will not go into neutral position, check the brake/steer link at the head and foot ends of the stretcher for correct orientation, and adjust if necessary. Also, inspect each caster and replace any that are defective. You may also need to tighten the brake/steer link screw.
What to do if the weight shown on the Hill-Rom P8020 scale display is not correct?
If the weight shown on the Hill-Rom medical equipment scale display is not correct, ensure all packing materials and shims have been removed before taking a weight reading. Also, verify that the load beam cables are connected in the correct order before taking another reading.
Why is there reduced braking ability in my Hill-Rom Medical Equipment?
To address reduced braking ability in your Hill-Rom medical equipment, ensure the brake/steer link adjustment at both ends of the stretcher is correct. If necessary, adjust the brake/steer link. If the issue persists, adjust the caster brake shoes or replace any defective casters.
What to do if the Hill-Rom P8020 stretcher will not lower?
If your Hill-Rom medical equipment stretcher will not lower, you can try to adjust the release mechanism. If that doesn't work, you may need to replace the hydraulic cylinder at either the head or foot end of the stretcher.
General| Brand | Hill-Rom |
|---|---|
| Model | P8020 |
| Category | Medical Equipment |
| Language | English |
To Next Page