Hill-Rom The Progressa - Zeroing and New Patient Setup; Zeroing the Scale; New Patient Scale Configuration

©2013 Hill-Rom Services, Inc. ALL RIGHTS RESERVED – INTL. Version
For detailed Warning and Caution statements, and operating instructions, refer to the Progressa™ Bed User Manual
Zero/New Patient
To activate:
• Make sure the patient is not in bed
• Put bed in required position
• Press the ‘Scale’ control on the GCI
• Press ‘Zero’
• Press:
– ‘New Patient’
1. Erases Scale History
2. Zeroes the scale
3. Returns surface to Normal mode
4. Turns off RemindMe reminders
– ‘Zero’
1. Does not erase Scale History
2. Zeroes to scale
6