The MetaNeb® System Instructions for Use (174432 REV 10) 15
Assemble the Circuit
Assemble the nebulizer before you attach it to
the circuit.
6. Connect the nebulizer to the nebulizer port
on the bottom of the handset.
7. Connect, but do not twist the nebulizer
hose of the tubing to the bottom of the
nebulizer. Make sure to push the bushing
all the way on to the nebulizer stem.
A twisted hose can cause the nebulizer
container to become loose.
OTHER CONFIGURATIONS
Mask
It may be difficult to connect the
adapter to the facemask. If
needed, apply more pressure
when you are connecting the two
parts.
Tracheostomy
Flex tube
adapter not
included
To Next Page
Loading...
Need help?
General
