EasyManuals Logo

Hillrom MetaNeb User Manual

Hillrom MetaNeb
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
18 The MetaNeb® System Instructions for Use (174432 REV 10)
Assemble the Circuit
ADD MEDICATION TO THE NEBULIZER
CAUTION:
Caution—The maximum capacity of the
nebulizer container is 5 mL. Do not fill the
container beyond the maximum fill indication
point (5 mL). To do so could cause equipment
damage.
1. Remove the container cap (1) from the
nebulizer.
2. If the green cone is not already installed, put
the green cone (2) into the container (3).
3. Fill the container (3) with the prescribed
medication. The minimum capacity of the
nebulizer is 1 mL and the maximum capacity
is 5 mL.
NOTE:
If there is no medication administered, use
normal sterile saline to ensure the hydration of
secretions.
4. Install and tighten the container cap on to
the container. Make sure the green cone (2) in the container stays in
position.
1 mL
5 mL

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hillrom MetaNeb and is the answer not in the manual?

Hillrom MetaNeb Specifications

General IconGeneral
BrandHillrom
ModelMetaNeb
CategoryMedical Equipment
LanguageEnglish

Related product manuals