Need help?Do you have a question about the Hillrom P280 and is the answer not in the manual?
General| Brand | Hillrom |
|---|---|
| Model | P280 |
| Category | Indoor Furnishing |
| Language | English |
Presents a diagram illustrating the scope of the P280 mattress functions and user interactions.
Details the primary functions and operational modes of the P280 mattress.
Provides physical and material specifications for different P280 mattress models.
Defines the purpose, patient suitability, and clinical applications of the P280 mattress.
Specifies patient conditions or situations where the device must not be used.
Describes the key therapeutic modes and functions offered by the P280 mattress.
Identifies the qualified personnel and care settings for P280 mattress usage.
Presents a table listing different P280 models, their descriptions, and configurations.
Outlines essential steps and safety checks before the initial operation of the device.
Warns about potential risks like entrapment, mechanical impacts, and emphasizes safety precautions.
Details the electrical safety requirements for connecting and operating the device.
Details environmental parameters (temperature, humidity, pressure) for device use and transport.
Provides instructions for storing the device correctly and notes on usage limitations.
Illustrates the control unit, identifying its various components and connection points.
Identifies and labels the different parts of the P280 MRS mattress configuration.
Explains the meaning of various symbols found on the upper surface of the mattress.
Details the functions of buttons and the meaning of indicator lights on the control unit.
Provides a reference for understanding various symbols used on device labels and markings.
Shows the location and types of labels found on the rear of the control unit.
Details the labels showing operational conditions, specifications, and serial numbers.
Displays identification labels present on the upper covers of P280 models.
Displays identification labels present on the bottom covers of P280 models.
Shows serial number and identification details for P005856A and P005858A mattress models.
Shows serial number and identification details for P005987A and P006052A mattress models.
Shows serial number and identification details for P006172A and P006173A mattress models.
Illustrates how to verify device model and specifications on packaging labels.
Illustrates how to verify device model and specifications on packaging labels.
Illustrates how to verify device model and specifications on packaging labels.
Assesses risks and provides guidance before positioning a patient on the mattress.
Ensures compatibility between the mattress, bed frame, and siderails for safety and performance.
Guides through unpacking the mattress and control unit and initial placement on the bed.
Details how to secure the mattress to the bed using head and foot end straps.
Covers adjusting straps, ensuring secure attachment, and connecting the control unit.
Details connecting the hose to the control unit and the power cord to the mains.
Ensures safe power cord routing, activation, and initial inflation process.
Emphasizes keeping the CPR valve accessible for emergency deflation.
Advises on optimal head section inclination and patient hip alignment for therapeutic benefits.
Explains how to choose between Alternating Low Pressure and Continuous Low Pressure modes.
Describes how to adjust air bladder pressure using comfort setting buttons.
Provides methods for adjusting pressure to achieve patient comfort.
Explains how to use Over-Inflation and P-Max functions for added support or initial inflation.
Details the steps for activating the CPR function for rapid deflation.
Explains how to deactivate the CPR function and restore normal operation.
Describes how to lock and unlock the user interface to prevent unintended changes.
Explains the meaning of audible indicators for fault conditions.
Explains the indicator lights for power faults, low pressure, and general malfunctions.
Details the procedure to deflate the mattress for safe patient transport.
Covers disconnecting the device and safely managing the power cord during transport.
Advises on preventing control unit damage during power failure or transport.
Explains transport cap usage and reconnection procedures after transport.
Ensures bed stability and manages power cord securing straps before transfer.
Guides on undoing mattress straps, placing the control unit, and moving the mattress.
Details the process of safely shutting down, disconnecting, and stowing the device.
Explains how to deflate, roll, and store the mattress properly for longevity.
Lists essential safety precautions to follow during the cleaning and disinfecting process.
Emphasizes the importance of cleanliness to prevent infection risks.
Outlines Hill-Rom's recommended cleaning and disinfecting guidelines.
Lists cleaning agents and solvents that should not be used to prevent device damage.
Specifies when different parts of the mattress require cleaning and disinfection.
Outlines disinfection procedures for specific infection risks like Clostridium Difficile.
Details safe procedures for cleaning the mattress using dry steam.
Covers final checks, including removing cleaning traces and ensuring dryness before reuse.
Lists safety precautions and restrictions for performing maintenance on the device.
Details recommended inspection frequencies and procedures for preventive maintenance.
Provides guidance for diagnosing and resolving common device issues.
Step-by-step instructions for safely replacing a blown fuse in the control unit.
Explains how to clean and replace the air filter on the control unit.
Outlines the terms and conditions that may void the device's warranty.
Provides instructions for safe disposal and end-of-life management of the device.
Lists optional accessories available for the P280 mattress, such as seat cushions.
Lists essential replacement or additional parts for the P280 mattress system.
Describes the MRS foam base accessory and its compatibility.
Details the features and intended use of the optional Reflex™ seat cushion.
Provides technical details such as dimensions and weight for the seat cushion.
Explains symbols found on the upper cover of the seat cushion.
Shows the location and content of identification labels on the seat cushion.
Shows the location and content of packaging labels for the seat cushion.
Guides through connecting the seat cushion to the mattress and control unit.
Details how to place, inflate, and secure the seat cushion for patient use.
Provides instructions for deflating, packing, and storing the seat cushion.
Provides guidance on cleaning and disinfecting the seat cushion.
Informs about the availability and ordering of a transport and storage bag.
Details the CE conformity mark and relevant standards for the device.
Lists the various safety and performance standards the device adheres to.
Presents results of emission tests for RF, harmonic, and voltage fluctuations.
Details manufacturer's recommendations for electromagnetic immunity.
Provides recommendations for immunity tests and electromagnetic environments.
Details compliance with voltage variations and RF immunity tests.
Outlines compliance with RF conducted and radiated immunity tests.
Lists recommended separation distances for various wireless communication systems.
Provides a table for calculating separation distances based on RF transmitter power.
To Next Page
