EasyManua.ls Logo

Hillrom P280 - Performing Final Cleaning Steps; Final Cleaning and Drying Procedures

Hillrom P280
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
187692(10) - EN - P280 Mattress Instructions for Use Page 35
Disinfecting
Servicing
Hill-Rom recommends the use of the Sanivap
®
method:
Application time recommended by the supplier: approximately 1 second;
Distance (recommended by the supplier) between the source and the surface
to be disinfected: approximately 3 mm;
Application: exterior parts of the mattress (covers);
Frequency: for each new patient.
Machine Washing the Upper Cover and the Seat Cushion
Do not always machine-wash, as doing so will reduce the lifetime of the
components. Machine-wash only if particular risks of infection occur.
Proceed with the following final steps before reusing the cleaned and disinfected
device.
Performing the Final Steps
Always remove all traces of the products used when washing or disinfecting
the device.
Make sure that all the parts of the device are perfectly dry before installing to
avoid any risk of condensation forming inside.
Maximum temperature: 70°C
Delicates
Only clean with oxygenated agents
Do not iron
Do not dry clean
Can be tumble dried
Moderate temperature: 50°C

Table of Contents

Related product manuals