Page 8 187692(10) - EN - P280 Mattress Instructions for Use
Referring to Technical Specifications
Specifications are subject to change.
Essential performances of the device
The P280 is a therapeutic mattress. It has two operating modes: continuous low
pressure (CLP) and alternating low pressure (ALP). The mattress firmness is
adjustable from the control unit.
Mattress Topper and Mattress
Characteristics Values
Model
P280 Overlay
P005856A/
P005858A/
P280 MRS
P005987A/
P006052A
a
a. See “Identifying the Models of the Device” on page 5.
P280 Air
P006172A/
P006173A
Length (inflated) 200 cm / ~ 80’’
Width (inflated) 90 cm / ~ 36’’
Height (inflated) 10 cm / 4" 17 cm / 7"
Weight 6,1 kg / 13,4 lb 12 kg / 26,5 lb 7,5 kg / 16,5 Ib
Range in transport mode 2 hours
Upper cover (applied
part of the device)
Polyurethane coating on polyester material, low-fric-
tion, stretchable in both directions, breathing, bacte-
riostatic, fungistatic and antimicrobial; can be wiped
and washed.
Bladders Polyurethane
Safe working load, including the total weight of the
patient, accessories (if they are supported by the
support system of the medical bed) and the load
supported by these accessories (excluding the weight
of the patient).
Safe Working Load is the technical limit of patient
weight that can be applied after which a damage may
occur on the mattress.
Pressure relief valve
threshold
1.5 psi / 10,3 kPa
Degree of protection
against electric shock
Type BF applied part
Cushions pressure.
Adjustable range
from 8"H
2
O to 30"H
2
O
To Next Page
Loading...
Need help?
General
