Page 20 187692(10) - EN - P280 Mattress Instructions for Use
Installing the Device
1. Unpack the control unit and the mattress.
Take care not to damage them when unpacking.
2. Check that all the components are present and correct and that the power
cord is not damaged.
3. Place the rolled up mattress on the top of the
bed and unroll it.
4. Check that the symbol on the cover is at
the foot of the bed.
The P280 Overlay, delivered without foam
base, is designed to be used in combination with a foam mattress
below. Take care not to use it directly on the mattress support platform.
The P280 MRS mattress, delivered with a foam basis and the P280 Air
mattress, are conceived to be used directly on a sleep deck. Be careful
to remove the foam mattress, if present, before installing.
5. Attach the mattress using the straps at the head and foot ends.
P280 Overlay
P280 MRS
To Next Page
Loading...